The fresh air and natural light, there are two reasons for installing a skylight in a trailer in tow. These two elements must be the greatest sense of the body. Skylights can be installed forward of the purchase of camper, but homeowners often emphasized that add more later. You must take into account open some skylights and other steps. In any case, this is a project of the day for all-you-craftsmen.
1 climb upwards safely on the roof of the trailer camping. Navigate to the location of big enough in the sky while Sonida 8 cm from the edge of the roof. Make sure the path has no wires and lights within the unit.
2. Select a location for the units and drill a hole at each corner. Run in a hole, the hole in the skylight cut corner.
3. the upper part of the skylight of the hole once again.
4. the application of the adhesive around the point where glow coincides with the roof. Pour the adhesive of goma where the roof meets the camper of the picture. Allow the adhesive "return" creates characteristic soft set. Enter a trailer camper to complete the installation.
5 adjusting the skylight to the hole in the roof. To reach the outer parts with adhesive and screws, which come from Junebug. Take advantage of the new sunlight in the body.
No comments:
Post a Comment