Monday, November 14, 2011

How to repair the roof of the rubber membrane 1

Rubber membrane roof area, panels made of steel or any other roof. The rubber membrane covers the entire ceiling and is commonly used for flat roof surfaces. Rubber membrane roof mounted atop of the fiber and glued. They require little maintenance, and will last for years without need of repair or replacement. When it occurs, fist or separates Couture water begins to filter through the chewing gum and stable and permanent repairs must be deployed to solve the problem.

1 cut the membrane roof damaged by a square, square edges and a knife for cutting tools. Leave at least 2 cm on both sides of the area.

2 Fiber cutting Board under roofing membranes using the knife tool also. In most cases, is severely damaged due to losses and must be replaced. Unscrew any and washers, which the Board of Directors of the drill of optical fiber and a little bit.

3 cut a piece of new optical fiber, replacing the first, which was deleted. Use the site to the extent of the region, which must be respected, and the edges of the square into a solid form. Write some pieces along the edges of the Board of Directors of fibers with a knife and breaking of the cutting line.

No comments:

Post a Comment